Mengonfirmasi Anda bukan dari AS atau Filipina

Dengan memberikan pernyataan ini, saya secara tegas menyatakan dan mengonfirmasikan bahwa:
  • Saya bukan warga negara atau penduduk AS
  • Saya bukan penduduk Filipina
  • Saya, secara langsung maupun tidak langsung, tidak memiliki lebih dari 10% saham/hak suara/kepentingan dari penduduk AS dan/atau tidak mengontrol warga negara atau penduduk AS dengan cara lain
  • Saya tidak berada di bawah kepemilikan langsung atau tidak langsung untuk lebih dari 10% saham/hak suara/kepentingan dan/atau berada di bawah kontrol warga negara atau penduduk AS dengan cara lain
  • Saya tidak berafiliasi dengan warga negara atau penduduk AS dalam hal Bagian 1504(a) dari FATCA
  • Saya menyadari tanggung jawab saya jika membuat pernyataan palsu.
Untuk tujuan pernyataan ini, semua negara dan wilayah dependen AS disamakan dengan wilayah utama AS. Saya berkomitmen untuk membela dan membebaskan Octa Markets Incorporated, direktur dan pejabatnya dari klaim apa pun yang timbul akibat atau terkait dengan pelanggaran apa pun atas pernyataan saya.
Kami berkomitmen menjaga privasi dan keamanan informasi pribadi Anda. Kami hanya mengumpulkan email untuk menyediakan penawaran khusus dan informasi penting tentang produk dan layanan kami. Dengan memberikan alamat email, Anda setuju untuk menerima surat tersebut dari kami. Jika Anda ingin berhenti berlangganan atau memiliki pertanyaan maupun permasalahan, silakan hubungi Layanan Pelanggan kami.
Octa trading broker
Buka akun trading
Back

When is the US ISM Manufacturing PMI and how could it affect EUR/USD?

US ISM Manufacturing PMI overview

The Institute of Supply Management (ISM) will release its latest manufacturing business survey result at 1400 GMT this Monday. Consensus estimate point to a slightly lower reading of 59.5 for July, down from previous month's four-month high level of 60.2. 

Deviation impact on EUR/USD

Readers can find FX Street's proprietary deviation impact map of the event below. As observed the reaction in case of a relative deviation of 0.81 or higher is likely to be in the range of 29-pips in the first 15-minutes and could stretch to 56-pips in the following 4 hours.

Alternatively, a deviation of -0.73 or less could move the pair lower by 29-pips in the first 15-minutes and by about 64-pips in the subsequent 4-hours.

The market reaction, however, is expected to be rather muted this time as investors might refrain from placing any aggressive bets ahead of the key event risk - the latest FOMC monetary policy decision, due to be announced later during the New-York trading session.

How could it affect EUR/USD?

Yohay Elam, FXStreet's own Analyst explains, “1.1665 separated ranges in late July. Lower, 1.1620 was a trough in late July. Lower, 1.1575 was a low point in the middle of the month. The 2018 low of 1.1508 is next.” 

“1.1750 is a double top and also was a high point in mid-July. 1.1795 is the peak during July. Higher above we find 1.1850, the peak that was seen in mid-June,” he adds further.

Key Notes

   •  How to trade the US ISM Manufacturing PMI with EUR/USD

   •  US: Manufacturer sentiment in July likely remained elevated - Nomura

   •  EUR/USD Technical Analysis: Spot struggled at the resistance short-term line around 1.1735

About the US ISM manufacturing PMI

The Institute for Supply Management (ISM) Manufacturing Index shows business conditions in the US manufacturing sector. It is a significant indicator of the overall economic condition in the US. A result above 50 is seen as positive (or bullish) for the USD, whereas a result below 50 is seen as negative (or bearish).
 

DXY Technical Analysis: Found contention in the short-term support line around 94.20

DXY daily chart           Daily high: 94.70 Daily low: 94.53 Support Levels S1: 94.28 S2: 94.01 S3: 93.87 Resistance Levels R1: 94.69
Baca selengkapnya Previous

USD/CAD seen stabilizing around 1.2922/17 – Commerzbank

In opinion of Axel Rudolph, Senior Analyst at Commerzbank, the pair could slip back to the 1.2920 region, where it is expected to consolidate ahead of
Baca selengkapnya Next